Perfect for SFF aficionados, first-time builders and for those who need a highly portable system in a small footprint with active airflow.
CNC-carved front and rear panels matched thick 3mm aluminum, high-quality anodizing and tolerances results in an exquisite package. 3.0 offers active airflow unlike any of its predecessors. Thanks to the support for a slim 140mm fan at the front and a 92mm fan at the rear it creates unprecedented airflow.
Tower coolers up to 155mm in height or with water cooling solutions are supported. Side radiator mounting solution allows many different combinations and radiators up to 280mm are supported.
Featuring GPU support up to 330 mm in length, 143mm in width and up to 3.5 slot high. This ensures unyielding compatibility even with the most powerful GPU solutions yet and beyond.
Up to 1 x 280mm radiators are supported and maximum supported pump height is 75mm
GPU Clearance
Up to 336mm in length, 165mm in width and 75mm in height are supported. (Customers are advised to check their GPU's width. 143mm should be the maximum width of the GPU. It is advised that width not exceed 143 so that consumers can connect power cables safely and securely and avoid problems with 12vhpwr and 8 pin power connectors).
CPU Cooler Support
Air coolers up to 158mm in height
PSU Length Clearance
SFX, SFX-L with included PSU extension cable
Drive Support
Depends on the configuration. At the bottom, 2 x 2.5 Drive and 1 x 3.5 Drive or 1 x 120mm bottom fan can be installed.
Fan Support
Top: 2 x 140mm only – Front: 1 x 120/140mm (slim fan only with side radiator installed) – Rear: 1 x 92mm or 1 x 80mm (slim fan is may be required depending on configuration) – Side: 2 x 140mm only – Below PSU: 1 x 120mm (not compatible with side fans installed)
